Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Filter Replacement Jeep Grand Cherokee

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

Lift the bonnet and place the support rod. Remove the seal near the windscreen, as shown in the video, and lift the cover that was underneath it. Meanwhile, pull out the plastic vents with the attached air filter. Fit the new air filter onto the plastic vents while they are removed from the car. Now gently insert it into the car's housing to avoid damage.

Ensure it is positioned correctly. Close the cover and replace the seal that was removed earlier.

Close the bonnet and test the car, ensuring no strange noises are heard.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Removing the Glove Box from a Jeep Grand Cherokee
Removing the Glove Box from a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) This guide shows you how to remove and replace the glove box of the Jeep Grand Cherokee, following the instructions below. First, get inside the vehi…
Diesel Filter Replacement on Jeep Grand Cherokee
Diesel Filter Replacement on Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To replace the diesel filter on a Jeep Grand Cherokee, follow these steps. Open the car's door and pull up the engine compartment release lever locat…
Replacing the Diesel Filter on a Jeep Grand Cherokee
Replacing the Diesel Filter on a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) In this video tutorial, you will learn how to replace the diesel filter on a Jeep Grand Cherokee. The diesel filter should be replaced during the veh…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos