Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Jeep Cherokee headlight bulb replacement

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: Headlight bulb
Operation: Jeep Cherokee headlight bulb replacement

Today we will see how to remove and replace the headlight bulb of a fourth series Jeep Cherokee, in simple steps. First we go to unscrew the screws of the mudguard, on the side concerned, in order to access the rear part of the light; once removed we go to remove the plastic protection cap of the bulb and we go to disconnect its electrical connector. At this point we can extract the lamp holder together with the bulb, in order to replace it with the new one, as shown in the video: we just have to reassemble everything, applying the reverse procedure.


Posted on 3 March 2024 by ScegliAuto



How to replace the headlight bulb on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to replace the Jeep Cherokee headlight bulbs, you need to lift the hood and remove the air filter to access the right bulb and the battery t
Replacement of the front headlight bulb of the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Today's step-by-step instructions will allow us to disassemble and replace the headlight bulb of the Jeep Cherokee. First, let's move to the side and
How to replace the headlight bulb on 2016 Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Let's see how to remove and replace the headlight bulb on a 2016 Jeep Cherokee, fourth series, in simple and quick steps. To access the headlight bul

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos