Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlamp Bulb on the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Headlight bulb

Today's step-by-step instructions will guide you through removing and replacing the headlamp bulb on the Jeep Cherokee. First, move to the side and start removing the screws securing the wheel arch cover to access the inside of the lamp unit; then disconnect the electrical connector of the bulb and release it to remove it from the headlamp assembly, as shown in the video. Now install the new bulb, ensuring it is the correct type and has the same fitting, connect it and then refit the cover; finally, reattach the wheel arch cover!

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on a Jeep Cherokee
Replacing the Front Headlamp Bulb on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Today, learn how to remove and replace the front headlamp bulb on a fourth-generation Jeep Cherokee in simple steps. First, unscrew the screws on the…
Replacing the Front Headlamp Bulb of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Here’s how to replace the front headlamp bulb in a Jeep Cherokee. First, turn the corresponding front wheel inwards towards the headlamp where the bu…
How to Replace the Headlamp Bulb on a Jeep Cherokee 5
How to Replace the Headlamp Bulb on a Jeep Cherokee 5
Jeep Cherokee (2013-2023 / KL, MK 5) Follow this brief and simple guide to remove and replace the dipped beam bulb of the front headlamp on the fifth generation Jeep Cherokee. First, tur…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos