Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Tire pressure warning light

In this video, you can see how to reset the tyre pressure warning light on a Jeep Compass by following a few simple steps necessary for the proper functioning of the vehicle. If you notice that the pressure warning light has illuminated on the instrument cluster, first resolve the issue that caused the drop in tyre pressure by visiting an authorised tyre fitter to check the condition of the tyres and their respective pressures. Once the issue is resolved and the tyres are inflated, simply turn on the instrument cluster again, and the reset will occur automatically.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure light on the Jeep Compass?
How to reset the tyre pressure light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To completely eliminate the tyre pressure light from the Jeep Compass dashboard, first inflate the tyres to the correct pressure value: this value wi…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
How to Reset the Tyre Pressure Warning Light on a Jeep Compass
How to Reset the Tyre Pressure Warning Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Resetting the TPMS warning light for tyre pressure should only be done after inflating the tyres according to the instructions in the owner's manual.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos