Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the TPMS warning light for tyre pressure should only be done after inflating the tyres according to the instructions in the owner's manual. On a 2023 Jeep Compass, the reset procedure is very simple; just start the vehicle after inflating the tyres.

Drive a few miles on the new tyres, and the warning light will turn off automatically. If it does not, you may need to visit a garage for a diagnostic check to resolve the issue.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Jeep Compass
How to Reset the Tyre Pressure Warning Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow the main steps to reset the tyre pressure warning light on the Jeep Compass. Before starting the operation, ensure all four tyres are at the c…
How to Replace the TPMS Sensor and Turn Off the Tyre Pressure Warning Light on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) This guide shows how to replace traditional valves with those equipped with tyre pressure sensors on a Jeep Compass and turn off the corresponding wa…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos