Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirror Cover on a Jeep Commander

Model: Jeep Commander MK 1 - Years 2005-2010
Part: Side mirror

Detach the mirror glass using a plastic lever, then open the door and start removing the panel by unscrewing the three bolts that secure it: one is near the opening handle, one near the central grab handle, and one close to the front pillar of the car. Remove the window switch panel using the lever and a small flat screwdriver, and disconnect its connectors. Extract the panel by prying behind it to free up access to the cover: unscrew the bolts that secure it to the car door and replace it.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Jeep Commander?
How do you reset the Service light on the Jeep Commander?
Jeep Commander (2005-2010 / MK 1) In order to reset the Service light of the Jeep Commander, you need to insert the ignition key into the slot, so that you can turn on the instrument …
How to Replace the Air Filter on the Jeep Commander
How to Replace the Air Filter on the Jeep Commander
Jeep Commander (2005-2010 / MK 1) The following video tutorial shows how to independently replace the air filter on the Jeep Commander. The air filter box is located under the front b…
Fuse box diagram of a Jeep Commander
Fuse box diagram of a Jeep Commander
Jeep Commander (2005-2010 / MK 1) Thanks to today's video, we can see all the diagrams of the two fuse boxes inside a Jeep Commander, a model in production from 2005 to 2010. In the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos