Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Jeep Cherokee alternator replacement

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Alternator
Operation: Jeep Cherokee alternator replacement

Today we will see, in this video tutorial, how to disassemble and replace the alternator of the Jeep Cherokee, following the instructions below. First of all we open the bonnet and start by disconnecting our battery, unscrewing the screws of the terminals; then we go to disconnect and remove the V-belt, as shown in the video. At this point, unscrew the fixing nuts of the alternator, using a 10 mm socket wrench, and disconnect the electrical wiring of the same; we remove and replace the alternator with the new one, applying the reverse procedure!


Posted on 16 April 2024 by ScegliAuto



How to replace the alternator on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to replace the alternator of the Jeep Cherokee you have to go and raise the hood so that you can access the components below. In particular,
How to replace the drive belt in the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) In this tutorial, we can see how to replace the service belt in the Jeep Cherokee, a very simple operation but one that requires good manual skills.
Replace the remote control battery of the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Does the battery of the Jeep Cherokee need to be replaced because it is flat? How to do? We open the remote control of the Jeep. We extract the metal

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos