Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Jeep Compass, there is no procedure that can be performed by navigating the menu on the instrument cluster display; instead, it will be necessary to connect a diagnostic tool to the vehicle's OBD port. This is located at the bottom left of the instrument cluster: after connecting the diagnostic tool, you will need to select the car model and the corresponding version, following the operations shown in the video.

Once the reset has occurred, you can disconnect the scanner and turn on the instrument cluster to verify it.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a Jeep Compass, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once conne…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, turn on the ignition by inserting the key into the corresponding switch: once the ignition is on, scrol…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, start by turning on the ignition to check that the light is present on the instrument cluster. Once the…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos