Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Cabin air filter

In this tutorial, you will learn how to replace the cabin air filter in a Jeep Cherokee, a very quick and simple operation. Start by opening the passenger side door, then remove the panel located beneath the glove compartment, disconnecting the light connector afterwards. Next, remove the panel at the end of the centre tunnel and open the long rectangular flap that protects the filter. At this point, proceed with the replacement, ensuring that the new filter is positioned correctly. Finally, follow the reverse procedure to reassemble everything.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in the Jeep Cherokee?
How to Replace the Cabin Filter in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you can see how to replace the cabin air filter in the Jeep Cherokee, a very simple and quick operation. First, unclip the centre tunn…
How to Replace the Cabin Air Filter in a 2014 Jeep Cherokee
How to Replace the Cabin Air Filter in a 2014 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn how to replace the cabin air filter in a 2014 Jeep Cherokee. It is a very simple operation that can be completed in a f…
Removal of the Cabin Air Filter on a Jeep Cherokee
Removal of the Cabin Air Filter on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Remove the cabin air filter on a Jeep Cherokee. The cabin filter is located at the bottom right of the centre tunnel. Use a plastic lever to detach t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos