Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Jeep Compass fuse diagram and scheme

Jeep Compass - Video tutorial

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Fuse box
Operation: Jeep Compass fuse diagram and scheme

In today's video tutorial we will see the placement of the fuse boxes and where to find their diagram of the Jeep Compass, following the instructions below. First we open the engine hood to locate the external fuse box; we find it next to the battery, removing the plastic cover, as shown in the video. Instead, we find the internal fuse box on the driver's side, by removing the plastic cover located above the pedal board; we use the use and maintenance manual to identify the faulty fuse, in order to replace it with the new one!


Posted on 11 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Compass 2006-2016 - Where is the headlight fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuse boxes located in the Jeep Compass? Read Answer
    • Compass 2016-2025 - Where are the fuse boxes located on the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the fuse box located on Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the Jeep Compass cigarette lighter fuse located? Read Answer
    • Compass 2016-2025 - Where is the Start & Stop system fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuses of the Jeep Compass located? Read Answer
    • Compass 2016-2025 - Why does the Start and Stop of a Jeep Compass not work? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos