Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery for the Jeep Renegade

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

Video tutorial

If the remote for the Jeep Renegade is not working, it may simply be due to a dead battery. To replace the battery, first obtain a similar battery to the original: (the battery is a flat CR 2032 type, 3V). Now take the key and start disassembling the plastic covers.

As shown in the video, press the button to release the key from its housing; extract the key, take the removal kit, hold the remote in one hand, insert the kit into the designated slot, and open the cover. Once the cover is open, remove the old battery and insert the new one. Reassemble the parts and check for proper operation.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Jeep Renegade
How to Replace the Key Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Start by pressing and holding the button on the back of your Jeep Renegade's key fob to extract the physical emergency key. Next, use a flathead scre…
How do you replace the battery of the Jeep Renegade remote control?
How do you replace the battery of the Jeep Renegade remote control?
Jeep Renegade (2014-2023 / ) To replace the battery of the Jeep Renegade remote control, you need to remove the key from the top of the device so that you can pry open its housin…
How to Replace the Key Fob Battery on a Jeep Renegade
How to Replace the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the key fob battery on a Jeep Renegade, first, pull out the metal key from its slot by unlocking the release lever. Once extracted, insert…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos