Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

Video tutorial

To replace the key fob battery on a Jeep Renegade, first, pull out the metal key from its slot by unlocking the release lever. Once extracted, insert the tip into the hole just above the key slot and lever it open to access the electronic board and battery.

Using a screwdriver, remove the battery from its slot and replace it with a new one. To reassemble, simply reverse the steps described.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Jeep Renegade?
How to Replace the Key Fob Battery of the Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the key fob battery of the Jeep Renegade, lower the lever located at the back of the fob, just below the chrome cover. This will allow you…
How do you replace the battery of the Jeep Renegade remote control?
How do you replace the battery of the Jeep Renegade remote control?
Jeep Renegade (2014-2023 / ) To replace the battery of the Jeep Renegade remote control, you need to remove the key from the top of the device so that you can pry open its housin…
Replacing the Key Fob Battery of the Jeep Renegade
Replacing the Key Fob Battery of the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video tutorial, you will learn how to disassemble and replace the battery of the key fob for the Jeep Renegade through these simple steps. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos