Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter on a Jeep Grand Cherokee, open the glove compartment located on the passenger side and remove the side cords that secure it. Once the glove compartment is free, you can remove it from its housing to access the rear. There will be a rectangular cover that needs to be opened by releasing the appropriate clip: inside, you will find the cabin filter, which can then be extracted and replaced with a new spare part.

After replacing it, reinstall all the removed parts.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / WL, MK 5) To replace the cabin air filter in your 2021 Jeep Grand Cherokee, follow these steps. First, go to the passenger side and open the glove compartment.…
How to Replace the Cabin Air Filter in the Jeep Grand Cherokee
How to Replace the Cabin Air Filter in the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In today's video, learn how to replace the cabin air filter in the Jeep Grand Cherokee. First, enter the vehicle from the passenger side. Open the gl…
Where is the cabin air filter located on the Jeep Grand Cherokee?
Where is the cabin air filter located on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) The cabin air filter in the Jeep Grand Cherokee is positioned inside the cabin, not in the typical compartment in front of the windscreen. To access …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos