Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulbs on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Side marker bulb

In today's video tutorial, you will see how to remove and replace the front indicator bulb on a Jeep Renegade, following the instructions below. First, move to the side of your car and start by removing the plastic cover found in the wheel arch. Then disconnect the electrical connector of the bulb and replace the indicator light as shown in the video. Now install the new bulb, ensuring it has the same fitting, by inserting it into the housing; then reassemble everything by applying the reverse procedure!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Indicator on a Jeep Renegade
How to Remove the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, open the bonnet of your Jeep Renegade. Begin by releasing the internal clips that secure the front indicator to the vehicle, us…
How to Replace the Front Indicator on a Jeep Renegade
How to Replace the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Hello everyone, today I will explain how to replace the front indicator light on your Jeep Renegade. First, open the bonnet and, using a spanner, rem…
How to Remove the Indicator Light from the External Mirror of a Jeep Renegade
How to Remove the Indicator Light from the External Mirror of a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the indicator light from the external mirror of a Jeep Renegade? Follow these steps: use a plastic or rubber lever to pry between the e…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos