Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Side marker light

Hello everyone, today I will explain how to replace the front indicator light on your Jeep Renegade. First, open the bonnet and, using a spanner, remove the rear bolt of the headlamp (the one closest to the indicator) to create some extra space for your hands to unlock the indicator light. Once this is done, insert one hand into the area where the indicator light is located and push outward to release the clips while pulling the indicator light from the outside with the other hand. This should allow you to pull it out. Now, install the new indicator light and clip it back in properly, and finally, reattach the bolt of the headlamp that you removed earlier.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Indicator on a Jeep Renegade
How to Remove the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, open the bonnet of your Jeep Renegade. Begin by releasing the internal clips that secure the front indicator to the vehicle, us…
How to Remove the Indicator Light from the External Mirror of a Jeep Renegade
How to Remove the Indicator Light from the External Mirror of a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the indicator light from the external mirror of a Jeep Renegade? Follow these steps: use a plastic or rubber lever to pry between the e…
Removing the Side Indicator on a Jeep Renegade
Removing the Side Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, learn how to remove the side indicator on a Jeep Renegade: a simple and quick process that requires no special tools. First, …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos