Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Indicator Bulb on Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Side marker bulb

Video tutorial

In this tutorial video, you will see how to remove and replace the indicator bulb of the front light on a Jeep Renegade in simple steps. First, turn the wheel fully to the affected side to access the wheel arch screws and reach the indicator bulb; then, once the wheel arch cover is removed, you can extract the bulb holder from the light unit to remove and replace the bulb, as shown in the video.

Finally, reassemble everything by reversing the procedure!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Indicator on a Jeep Renegade
How to Remove the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can start, open the bonnet of your Jeep Renegade. Begin by releasing the internal clips that secure the front indicator to the vehicle, us…
How to Replace the Front Indicator Bulbs on a Jeep Renegade
How to Replace the Front Indicator Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In today's video tutorial, you will see how to remove and replace the front indicator bulb on a Jeep Renegade, following the instructions below. Firs…
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos