Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to reset the Jeep Compass service

Jeep Compass - Video tutorial

Model: Jeep Compass MK 2, 552 - Years 2016-2024
Part: -board computer
Operation: How to reset the Jeep Compass service

Let's see in today's video how to reset the expired service warning in the second series Jeep Compass. This is necessary after the periodic coupon has been carried out, to give the car confirmation that this has been carried out correctly. We begin the operation by climbing into the driver's seat of the car. We now hold down the brake pedal and turn on the instrument panel only once, by pressing the start button. Still holding down the brake pedal, press the accelerator pedal three times, then release both and switch off the ignition. On restart the message will be cleared.


Posted on 2 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Compass 2016-2025 - Why is the touch display of the Jeep Compass 2 not working? Read Answer
    • Compass 2016-2025 - Why is the central display of the Jeep Compass not turning on? Read Answer
    • Compass 2016-2025 - What to do if the Jeep Compass Start&Stop doesn't work? Read Answer
    • Compass 2016-2025 - Why doesn't the Jeep Compass Uconnect system work? Read Answer
    • Compass 2016-2025 - Why doesn't the Start&Stop of the Jeep Compass 2 work? Read Answer
    • Compass 2016-2025 - What does the warning light mean to change the engine oil in the Jeep Compass? Read Answer
    • Compass 2016-2025 - What does the oil warning light mean in the Jeep Compass? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos