Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to remove the expired service notice in the Jeep Compass

Jeep Compass - Video tutorial

Model: Jeep Compass MK 2, 552 - Years 2016-2024
Part: -board computer
Operation: How to remove the expired service notice in the Jeep Compass

In today's video we see how to reset the expired service notice in the Jeep Compass (but the procedure is identical in the Jeep Renegade): We start by turning on the instrument panel, turning the key to position 1 or pressing the start button once. Press the brake pedal for hours without releasing it. Fully depress the accelerator pedal three times within 30 seconds, always keeping the brake pedal pressed. Now switch off the instrument panel and then release the brake pedal. At the next restart, the vehicle will have eliminated the expired service message and you can continue.


Posted on 6 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Compass 2016-2025 - Why is the touch display of the Jeep Compass 2 not working? Read Answer
    • Compass 2016-2025 - Why is the central display of the Jeep Compass not turning on? Read Answer
    • Compass 2016-2025 - What to do if the Jeep Compass Start&Stop doesn't work? Read Answer
    • Compass 2016-2025 - Why doesn't the Jeep Compass Uconnect system work? Read Answer
    • Compass 2016-2025 - Why doesn't the Start&Stop of the Jeep Compass 2 work? Read Answer
    • Compass 2016-2025 - What does the warning light mean to change the engine oil in the Jeep Compass? Read Answer
    • Compass 2016-2025 - What does the oil warning light mean in the Jeep Compass? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos