Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How do i replace the battery of the Jeep Grand Cherokee?

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Part: Battery
Operation: How do i replace the battery of the Jeep Grand Cherokee?

The Jeep Grand Cherokee's battery is located inside the passenger compartment, under the front passenger seat. To be able to remove it, it is necessary to push the passenger seat forward and remove the battery cover with the carpet. Once the battery is accessible, it will be possible to disconnect the terminals connected to it and loosen the fixing bolts of the device. In this way the latter can be removed from its housing and replaced with a new spare part. After installing the new battery, it will need to be covered and the passenger seat repositioned.


Posted on 15 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - Where is the battery located on the Jeep Grand Cherokee 3? Read Answer
    • Grand Cherokee 2004-2010 - Where is the battery of the Jeep Grand Cherokee Mk3 located? Read Answer
    • Grand Cherokee 2010-2021 - What is the location of the battery in the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - Where is the battery of the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - Where is the battery located in the Jeep Grand Cherooke? Read Answer
    • Grand Cherokee 2010-2021 - Where is the Jeep Grand Cherokee battery located? Read Answer
    • Grand Cherokee 1998-2004 - Where is the battery located in the Jeep Grand Cherokee? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos