Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Jeep Compass?

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

To replace the radio in the Jeep Compass, you need to use a lever tool to detach the plastic cover located on the centre panel around the radio. Once this cover has been removed, you can loosen the screws underneath so that the old radio can be extracted from its housing and the connectors at the back can be disconnected.

You will then need to connect the new radio to these connectors and insert it back into its housing, securing it with the appropriate bolts and covering it with the plastic from the centre panel.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Jeep Compass?
How to Replace the Radio in the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the radio in the Jeep Compass, use a tool to pry off the plastic cover surrounding the radio and climate control. Once the cover is remove…
How to Remove the Radio in a Jeep Compass?
How to Remove the Radio in a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) This tutorial demonstrates how to remove the radio in a Jeep Compass, a very simple and quick operation. Before proceeding, ensure the key is not ins…
How to disassemble the radio of the Jeep Compass 2
How to disassemble the radio of the Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) If the factory car radio in the interior of your second series Jeep Compass has suddenly stopped working and you want to find out how to safely and q…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos