Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radio in a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Car stereo

This tutorial demonstrates how to remove the radio in a Jeep Compass, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by prying off the central console trim using a plastic spatula to avoid leaving any marks, then unscrew the four fixing screws of the radio with a standard cross-head screwdriver. Once done, you can pull the unit out of its housing, disconnect the rear connectors, and fit the replacement by reversing the procedure.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, see how to remove the car radio in the Jeep Compass MK2, whether it is damaged or if you need to access something inside the …
Jeep Compass (2006-2016 / MK 1, MK 49) Replace the car radio with a new, more modern one. First, remove the covering plastics around the perimeter. Use plastic trim tools to detach the rad…
Jeep Compass (2006-2016 / MK 1, MK 49) To replace the radio in the Jeep Compass, use a tool to pry off the plastic cover surrounding the radio and climate control. Once the cover is remove…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos