Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Timing belt

Video tutorial

To replace the timing belt on the Jeep Renegade, open the bonnet to access the left side of the engine block. Here, you will find the air filter, which must be removed along with the side cover of the engine block, under which the pulleys are located.

To slide off the belt, it will be necessary to loosen the nuts securing the central pins of the pulleys. Once the old belt has been removed, you can install the new one by tightening the pulley nuts.

After installation, reassemble all the other parts that were removed.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today's main steps will show you how to remove and replace the timing belt on the Jeep Renegade 2.0 Multijet. First, open the engine bonnet and remov…
How to replace the timing belt of the Jeep Renegade 2.0 Multijet
How to replace the timing belt of the Jeep Renegade 2.0 Multijet
Jeep Renegade (2014-2026 / MK 1, BU, 520) The main steps illustrated in this guide will show us how to disassemble and replace the timing belt of the Jeep Renegade 2.0 Multijet. First, we lif…
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
Jeep Renegade (2014-2026 / MK 1, BU, 520) The video here briefly shows what is required to replace the timing belt on the Jeep Renegade 2.0 Multijet and where in the vehicle the work should b…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - What is the mileage to replace the timing belt on the Jeep Renegade? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos