Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the soft top of the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years 2007-2018
Part: Convertible top

In this video tutorial we will see how to remove and replace the hood of the Jeep Wrangler, following these simple steps. First of all, we open the tailgate of the boot and start by unhooking the soft top on the back; now we unhook the side parts of the same, removing it from the plastic side uprights, as shown in the video. At this point we lower the various hinges and also remove the side uprights; finally we unhook the soft top from inside the car and from the roof, by acting on the upper bracket. For reassembly, just apply the reverse procedure!

Posted on 12 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear shift knob of the Jeep Wrangler JK
How to remove the gear shift knob of the Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) Removing the gear shift knob of your Jeep Wrangler JK is really simple and if you want to complete the operation in question in a few seconds, just f…
Removal of the Jeep Wrangler roof
Removal of the Jeep Wrangler roof
Jeep Wrangler (2007-2018 / JK, MK 3) Today we will see how to remove the top of the roof of a Jeep Wrangler. First we remove the parts at the top, at the height of the front seats; then …
Where is the OBD2 port located on the Jeep Wrangler 4?
Where is the OBD2 port located on the Jeep Wrangler 4?
Jeep Wrangler (2018-2026 / JL, MK 4) To be able to find the OBD2 port inside your Jeep Wrangler Mk4, you do not need to disassemble any components. All you have to do is carefully read t…

How to Replace the Interior Light Bulbs on a Jeep Renegade

Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the panel), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips are fully engaged in the side plastic). Test the correct operation of the bulbs in the interior light after installation.

Watch the video!


by ScegliAuto

More videos