Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Time on a 2012 Jeep Cherokee

Model: Jeep Cherokee MK 4, KK - Years 2008-2012
Part: Clock

In this guide for your 2012 Jeep Cherokee (fourth generation), you will find all the necessary steps to manually change the time displayed on the car's screen. First, enter the cabin and turn on the ignition. Navigate to the radio control panel and press and hold the "Time" button until the time starts flashing. Then, use the right knob to adjust the hour. Press "Time" again to switch to minutes. Repeat the same procedure, and finally, press and hold the "Time" button one last time to save the changes.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the 2012 Jeep Cherokee?
Where is the fuse box located in the 2012 Jeep Cherokee?
Jeep Cherokee (2008-2012 / MK 4, KK) The 2012 Jeep Cherokee has a fuse box inside. The fuse box is located under the bonnet, specifically on the right side, near the engine. To view the …
How to Reset the Oil Light on the Jeep Cherokee
How to Reset the Oil Light on the Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) Resetting the oil light on the 2010 Jeep Cherokee is really very simple and takes just a few seconds to complete the entire operation correctly. Let’…
How to reset the service light on a 2004 Jeep Cherokee
How to reset the service light on a 2004 Jeep Cherokee
Jeep Cherokee (2002-2007 / KJ, MK 3) The reset of the service light for the 2004 Jeep Cherokee must be performed after carrying out maintenance and checks. The steps to perform the reset…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos