Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Cigarette Lighter Fuse on the Jeep Patriot?

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

Video tutorial

The cigarette lighter fuse on the Jeep Patriot is located inside the dedicated fuse box in the vehicle: this is positioned on the right side of the engine compartment. Therefore, you can access it by opening the bonnet using the lever located under the steering column and removing the cover from the top of the box. The cigarette lighter fuse will be on the second row of fuses and will be the second from the right.

This fuse is rated at 15 Amperes, so it should be replaced with a new part of the same amperage.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Jeep Patriot?
Where is the fuse box located in the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the box containing the fuses of your Jeep Patriot is located, don't worry because below you will find the steps to follow to …
Location and Diagram of the Fuse Boxes for the Jeep Patriot MK1
Location and Diagram of the Fuse Boxes for the Jeep Patriot MK1
Jeep Patriot (2007-2017 / MK 1) In this guide, we will look at the diagram of the fuse boxes for the Jeep Patriot MK1, while this section describes their location: one power module …
Where is the fuse box of the Jeep Patriot located?
Where is the fuse box of the Jeep Patriot located?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the fuse box of your Jeep Patriot is located, all you have to do is follow the procedure described in the following guide. St…

Other guides you may be interested in

    Frequently Asked Questions

    • Patriot 2007-2017 - Where is the alternator fuse located on the Jeep Patriot? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos