Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Handbrake Adjustment on the Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Parking brake

See other generations:
Video tutorial

After several years of use, it is normal for the handbrake on the Jeep Cherokee XJ to start losing grip, due to the shoes stretching the cable, which increases the lever travel. The handbrake adjustment is done through the adjuster located under the vehicle's floor, corresponding to the handbrake lever's housing.

To perform the adjustment, lift the car and adjust the floor nut. Once adjusted, the handbrake should feel much tighter. It is necessary to adjust the handbrake to avoid issues.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How do you adjust the handbrake of the Jeep Cherokee?
How do you adjust the handbrake of the Jeep Cherokee?
Jeep Cherokee (1984-2001 / MK 2, XJ) To adjust the handbrake of the Jeep Cherokee, you will need to access the underside of the car: here it will be possible to find, near the rear wheel…
How to Adjust the Handbrake on Jeep Cherokee
How to Adjust the Handbrake on Jeep Cherokee
Jeep Cherokee (2002-2007 / MK 3, KJ) If the handbrake lever has a long travel, it’s because as the shoes wear or the cables stretch, the lever's travel tends to increase. You can adjust …
How to Reset the Oil Light on the 2008 Jeep Cherokee
How to Reset the Oil Light on the 2008 Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) In this new mini guide for all of you with a fourth-generation Jeep Cherokee (2008), we will describe the various steps necessary to complete the man…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos