Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

Video tutorial

Have you replaced the engine oil and filter on this vehicle model? You need to complete the job by resetting the service light that has appeared on the instrument cluster. To do this, follow the procedure outlined in the video and description below: Enter the cabin and turn on the ignition.

Press and hold the brake pedal. Press the accelerator pedal three times.

Turn off the ignition. Release the brake pedal.

Turn the ignition back on to check if the reset was successful.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Resetting the service light on a 2016 Jeep Renegade
Resetting the service light on a 2016 Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Start by ensuring that the service has been completed, then sit in the driver's seat of your Jeep Renegade. Once seated, press the ignition button on…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2021 - How to reset the Uconnect system in the Jeep Renegade? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos