Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stock Radio from a 2017 Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Car stereo

Removing the stock radio from your 2017 Jeep Grand Cherokee is undoubtedly an operation that requires careful attention. However, with the following guide, you will be able to do it quickly, safely, and without any difficulty. Let's find out how to do it. First, turn off the car and park it safely. Next, using a small plastic spatula or a similar object, remove the entire central panel. At this point, unscrew the screws that hold the radio in place and pull it towards you. Finally, disconnect the electrical connector.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Jeep Cherokee and Jeep Grand Cherokee Key Fob
How to Replace the Battery in a Jeep Cherokee and Jeep Grand Cherokee Key Fob
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the battery in a Jeep Cherokee and Jeep Grand Cherokee key fob, first obtain a new compatible battery. Take the key and extract the emerge…
How to Open the Remote of a Jeep Grand Cherokee
How to Open the Remote of a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Is the remote battery of your Jeep Grand Cherokee flat? Here’s how to open it to replace the battery. Take the Grand Cherokee remote and, using a scr…
How to remove the fuel tank on a Jeep Grand Cherokee?
How to remove the fuel tank on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) In this tutorial, you will see how to remove the fuel tank on a Jeep Grand Cherokee, a task that requires good manual skills. First, disconnect the n…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos