Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Error detection in the relay circuit

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WH, MK 3, WK - Years 2004-2010
Part: Engine
Operation: Error detection in the relay circuit

With a reader of the errors present in the sensor check, go to identify where the problems are. In this case it is a relay, disconnect the battery to avoid damaging other instruments, it will be better for you to equip yourself with all the necessary manuals and diagrams, in this way you can make all the necessary attempts to understand where the problem is. Check under the passenger seat if all connectors are connected and if necessary carry out tests on those as well. Once you have found the main problem, go and replace the necessary parts by following all the steps backwards and carry out the test by starting the machine.


Posted on 19 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2010-2021 - What problems have been encountered on the Jeep Grand Cherokee 3.0 crd engine? Read Answer
    • Grand Cherokee 2010-2021 - What problems does the Jeep Grand Cherokee 3.0 CRD have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos