Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Where is the fuse box located in the Jeep Cherokee Sport?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 2, XJ - Years 1984-2001
Part: Fuse box
Operation: Where is the fuse box located in the Jeep Cherokee Sport?

The Jeep Cherokee has two fuse boxes inside. In today's video, we will explain the location of the boxes. The first box is located inside the vehicle on the right side, passenger side, of the plastic. Inside are fuses for various electrical parts of the vehicle. The cover has a diagram to help locate the fuses. For more information, it is always possible to consult the instruction manual. The second fuse box is located inside the engine compartment, near the battery. It also has a guide on the cover to help locate the fuses.


Posted on 23 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Cherokee 2008-2012 - Where are the fuses located in the Jeep Cherokee? Read Answer
    • Cherokee 2013-2023 - Where are the fuses located in the Jeep Cherokee 5? Read Answer
    • Cherokee 1984-2001 - Where are the fuse boxes on the Jeep Cherokee Mk2? Read Answer
    • Cherokee 2008-2012 - Why does the heating of a Jeep Cherokee have problems? Read Answer
    • Cherokee 1984-2001 - Where to find the fuse box in Jeep Cherokee? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos