Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Jeep Patriot 2.4?

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in a Jeep Patriot 2.4, a simple and quick operation. First, ensure the engine is completely cold.

Then, go underneath the vehicle, taking all necessary safety precautions, and loosen the drain plug using a 13 mm spanner. Allow all the oil in the system to drain out. Locate the filter and unscrew it, using a strap wrench if necessary.

At this point, tighten both the new filter and the plug, open the bonnet, and pour in the required amount of oil through the designated hole.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a Jeep Patriot
How to Change the Engine Oil of a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) To change the engine oil of the Jeep Patriot, loosen the drain plug located at the bottom of the vehicle: once this plug is loosened, you can let all…
How to Replace the Rear Light Bulb on the Jeep Patriot
How to Replace the Rear Light Bulb on the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this new guide aimed at all of you who own a Jeep Patriot, we will explain step by step how to replace the rear light bulb yourself. First, ensure…
Where is the fuse box of the Jeep Patriot located?
Where is the fuse box of the Jeep Patriot located?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the fuse box of your Jeep Patriot is located, all you have to do is follow the procedure described in the following guide. St…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos