Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Bonnet of the Jeep Liberty

Model: Jeep Jeep Various
Part: Body

Video tutorial

In today's article, learn how to open the bonnet of the Jeep Liberty, a useful procedure for checking or replacing the battery. To open the bonnet, pull the lever inside the driver's side door.

Then, look at the lower part of the panel near the pedals to locate the bonnet release button. Pull it to open the bonnet.

Next, go to the centre of the bonnet and press the release pin to unlock it, gaining access to the engine compartment.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Jeep Jeep Various Today we will explain how to replace the timing belt of the 2005 Jeep Liberty. To perform this operation, we need to open the front hood of the vehic…
Jeep Jeep Various If you follow all the steps described in this new guide, you will be able to replace the engine air filter of your 2010 Jeep Liberty without any diff…
Jeep Jeep Various In the following guide addressed to all of you who own a 2009 Jeep Liberty, we will describe all the necessary steps for you to complete the replacem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos