Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the battery of the Kawasaki Vulcan, you need to unclip the pins that secure the seat to its housing so that it can be completely removed. Underneath, there will be a plastic cover that needs to be removed by loosening the appropriate securing bolts: this will give you access to the battery, which can be disconnected from the terminals and freed from the bolts that hold it in place. Now, the device can be extracted and replaced with a new spare part; after installing the new battery, remount all the removed components.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Kawasaki Vulcan 900?
How to Replace the Clutch on a Kawasaki Vulcan 900?
Vulcan Vn900b To replace the clutch on the Kawasaki Vulcan 900, loosen the screws that secure the chrome cover located at the bottom of the right side of the bike.…
How to Remove the Rear Wheel of a Kawasaki Vulcan
How to Remove the Rear Wheel of a Kawasaki Vulcan
Vulcan Vn900b Before you can start, lift the rear side of your Kawasaki Vulcan. Begin by removing the drive belt covers, unscrewing the fastening screws. Next, uns…
Removing the ECU from a Kawasaki Vulcan VN900B
Removing the ECU from a Kawasaki Vulcan VN900B
Vulcan Vn900b In today's tutorial, you will learn how to remove the ECU from a Kawasaki Vulcan VN900B in simple and quick steps. First, remove the seat of your mot…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos