Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Kawasaki Z750

Model: Kawasaki Z750
Part: Headlight bulb

Video tutorial

To replace the headlamp bulb on a Kawasaki Z750, loosen the screws that secure the headlamp to the corresponding fairing: these screws are located on the inner part of the front fairing, just behind the fork. Once the screws are loosened, detach the fairing to access the interior of the headlamp: here, remove the cover and disconnect the connector attached to the bulb, pulling the bulb out of its socket.

This will allow you to connect the new bulb, inserting it into the headlamp and checking that the optical unit is functioning.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Kawasaki Z750
How to Replace the Front Brake Pads on a Kawasaki Z750
Z750 To replace the brake pads on a Kawasaki Z750, loosen the bolts located on the side of the brake caliper, near the bottom of the fork. Once the brake …
Replacing Front Headlamp Bulb on Kawasaki Z750
Replacing Front Headlamp Bulb on Kawasaki Z750
Z750 In this video, you will see how to remove and replace the front headlamp bulb on a Kawasaki Z750. First, remove the side clips of the headlamp and th…
How to replace the rear light of the Kawasaki Z750
How to replace the rear light of the Kawasaki Z750
Z750 To replace the rear light of the Kawasaki Z750, insert the key into the lock located on the left side of the bike: this will allow you to remove the …

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos