Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Time on the Kawasaki Ninja 300

Model: Kawasaki Ninja 300
Part: Clock

Video tutorial

If the clock on your Kawasaki Ninja displays the wrong time and you want to change it manually, follow the instructions in this guide to make the adjustment safely and quickly. First, turn on the ignition.

Press and hold the second button located under the speedometer for a few seconds, and release it as soon as the time starts to flash. Press it again to select the hour digits and use the other button to change them manually.

Repeat the same procedure for the minute digits, and finally, press the left button once more to save the changes.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Ninja 300 Before you can begin, position your Kawasaki Ninja 300 upright. Start by inserting the motorcycle key into the designated lock located at the bottom …
Ninja 300 To replace the headlamp bulb on the Kawasaki Ninja 300, rotate the handlebars in the opposite direction of the bulb to be replaced. This will allow y…
Ninja 300 In this tutorial, you will see how to remove the air filter on the Kawasaki Ninja 300, a very simple and quick operation, for example, if you need to…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos