Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Body on the Kawasaki Ninja 300

Model: Kawasaki Ninja 300
Part: Throttle body

Video tutorial

Today's instructions will show you how to remove and replace the throttle body on the Kawasaki Ninja 300 motorcycle in simple steps. First, place your motorcycle on a stand and remove the rider's seat; then disconnect the throttle body electrical connector and unscrew the mounting screws located at the top, as shown in the video.

At this point, disconnect the throttle cable by loosening the adjustment nut; unscrew the throttle body screws to detach it and remove it, replacing it with a new original part or cleaning it.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seat of a Kawasaki Ninja 300
How to Remove the Rear Seat of a Kawasaki Ninja 300
Ninja 300 Before you can begin, position your Kawasaki Ninja 300 upright. Start by inserting the motorcycle key into the designated lock located at the bottom …
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
Ninja 300 To replace the headlamp bulb on the Kawasaki Ninja 300, rotate the handlebars in the opposite direction of the bulb to be replaced. This will allow y…
How to Replace the Battery in the Kawasaki Ninja 300?
How to Replace the Battery in the Kawasaki Ninja 300?
Ninja 300 Replacing the battery in the Kawasaki Ninja 300 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, ensure …

How to replace the air filter on a Sym VF3I?

To replace the air filter on a Sym VF3I, open the underseat compartment to access the screws and disconnect the battery connectors. The battery will then need to be removed from its housing, allowing access to the components underneath. Here, you will find the filter box cover, which should be removed by unscrewing the fastening screws. Once the old filter is removed, insert the new one into its place and secure the cover with the screws. Then, reinstall the battery and close the underseat compartment.

Watch the video!


by ScegliAuto

More videos