Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Er 5
Part: Engine oil

To change the motor oil of a Kawasaki ER 5, start by placing the motorcycle on a center stand to ensure stability. Find the oil drain plug on the engine, usually located on the bottom side. Use an appropriate wrench to loosen the drain plug and let the used oil completely drain into a suitable container. Once the draining is complete, securely tighten the drain plug. Next, locate the oil fill cap, usually located on the side of the engine. Remove the cap and use a funnel to slowly pour the correct amount of new motor oil recommended in the owner's manual. Make sure not to exceed the maximum level. After filling the oil, replace the fill cap and tighten it securely. Start the engine for a few minutes and check for any oil leaks. Finally, turn off the engine and check the oil level with the dipstick. Add oil if necessary to reach the correct level. These steps ensure that the motor oil of your Kawasaki ER 5 is changed correctly, ensuring optimal engine performance.

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Filter on a Kawasaki ER-5
How to Change the Engine Oil and Filter on a Kawasaki ER-5
Er 5 This guide shows how to change the oil and oil filter on Kawasaki ER-5 models. First, place the motorcycle on a stand, preferably a motorcycle stand.…
How to Replace the Clutch on a Kawasaki ER-5
How to Replace the Clutch on a Kawasaki ER-5
Er 5 Today, we will go through step-by-step instructions for removing and replacing the clutch discs on a Kawasaki ER-5. First, place the motorcycle on it…
How to Replace the Air Filter of the Kawasaki ER 5
How to Replace the Air Filter of the Kawasaki ER 5
Er 5 To replace the air filter of the Kawasaki ER 5, loosen the screws that secure the seat of the motorcycle to its housing: this will allow the seat to …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos