Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Side Fairings of the Keeway RKF 125

Model: Keeway Rkf 125
Part:

Video tutorial

Today, let’s discover the instructions to remove and replace the side fairings of the Keeway RKF 125 motorcycle. First, place the bike on a stand and start unscrewing the screws of the side fairings; remove the rider's seat to access the other screws, then completely remove the plastic fairings, as shown in the video.

At this point, if necessary, replace the fairings with new ones, securing them properly with the original screws; reassemble the seat correctly and ensure everything is perfectly installed by following the video tutorial to the end!


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Install Side LEDs on the Keeway RKF 125
How to Install Side LEDs on the Keeway RKF 125
Rkf 125 This guide provides the main instructions for installing the side LEDs on the Keeway RKF 125 motorcycle. First, place your motorcycle on a stand and …
How to Install Additional Lights on the Keeway RKF 125
How to Install Additional Lights on the Keeway RKF 125
Rkf 125 This guide shows how to install additional lights on the Keeway RKF 125. This operation may void the vehicle's warranty. After removing the motorcycl…
How to Remove the Rider Seat on a Keeway RKF 125
How to Remove the Rider Seat on a Keeway RKF 125
Rkf 125 Before starting, position your Keeway RKF 125 on the side stand. Insert the motorcycle key into the lock near the passenger seat and turn it. Next, u…

How to Dismantle the Engine of the TM Racing MX 125?

To dismantle the engine of the TM Racing MX 125, loosen the screws securing the side casing of the bike so that it can be removed, providing access to the clutch. Next, remove the spark plug from the top of the cylinder, then loosen the screws securing the cylinder as well: after removing the cylinder, you will be able to locate the piston underneath, which must be freed from the conrod by expanding its retaining ring. At this point, all further components within the engine block can be removed and replaced with new ones.

Watch the video!


by ScegliAuto

More videos