Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter on the Keeway K Light 202, first remove the screws securing the seat and slide it out of its housing. Using an Allen key, remove the pin that secures the cover on the right side of the motorcycle: beneath the cover, remove the relevant screws to access the air filter. This can then be removed; it is advisable to clean the housing before inserting the new filter. Once the new part is inserted into the housing, reassemble all previously removed components.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on the Keeway K-Light 202?
How to replace the air filter on the Keeway K-Light 202?
K Light 202 To replace the air filter on the Keeway K-Light 202, loosen the side panel located on the right side of the bike, just below the fuel tank. Once the …
How do you replace the muffler of the Keeway K-Light 202?
How do you replace the muffler of the Keeway K-Light 202?
K Light 202 To replace the exhaust of the Keeway K-Light 202, you need to loosen the screws that attach it to its housing: this will be located near the rear whe…
How to Change the Engine Oil and Oil Filter on a Keeway K-Light 202
How to Change the Engine Oil and Oil Filter on a Keeway K-Light 202
K Light 202 Let’s see how to perform routine maintenance by changing the engine oil and oil filter on a Keeway K-Light 202. First, position the bike on the centr…

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos