Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Assembly of the side step of the Kia Sportage MK4

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Body

To mount the side steps on the Kia Sportage, we start by removing the fastenings in the rear wheel arches of the bar under the side doors and those in the front wheel arches that also support the mudguards. We remove the bar and remove, with a plastic lever, the fastening clips and the bottom caps. In the lower part, we insert four threaded pins to which we will screw the four brackets. We take the step and insert four threaded nuts and fastening clips into the lower guide, we position the step in place. Acting from below, we position the threaded nuts in correspondence with the brackets, insert the bolts and tighten all the nuts.

Posted on 27 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headlight bulb from the 2018 Kia Sportage
How to remove the headlight bulb from the 2018 Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Replacing the left headlight bulb of the 2018 Kia Sportage is a straightforward task that can be done independently. The first step is to open the bo…
How do you remove the rear tail light of the Kia Sportage?
How do you remove the rear tail light of the Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) In order to remove the rear light of the Kia Sportage, you need to open the rear hatch so that the black trim panel next to the corresponding light i…
How to recline the rear seat of the Kia Sportage
How to recline the rear seat of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today we will see how to increase the space of the trunk in a Kia vehicle. The rear seats of the 2018 Kia Sportage can be reclined with two simple st…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos