Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the radio of the Kia Forte?

Model: Kia Forte K3 MK  3, BD - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

In order to reset the radio of the Kia Forte, you need to turn on the instrument panel by inserting the key into the ignition switch: once the ignition is on, you can locate the small button located between the "FILE" and "TUNE" labels, at the bottom right of the radio.

The small button must be held down using a pointed object such as a pen or toothpick: after a few seconds of holding down the button, you will notice that the radio turns off and when turned back on, it will be reset.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

How to Remove the Factory Radio from the Kia Forte K3
How to Remove the Factory Radio from the Kia Forte K3
Kia Forte K3 (2013-2018 / MK  2, YD) Follow these steps to remove and replace the factory radio in the Kia Forte K3. First, get inside the vehicle and start by detaching the plastic cove…
How to Reset the Oil Light on a 2020 Kia Forte GT
How to Reset the Oil Light on a 2020 Kia Forte GT
Kia Forte K3 (2018-2025 / MK  3, BD) Resetting the oil light on your Kia Forte GT is not difficult, and you can complete the process on your own by following these steps. Get in the car …
How to Reset the Oil Light on the 2015 Kia Forte
How to Reset the Oil Light on the 2015 Kia Forte
Kia Forte K3 (2013-2018 / MK  2, YD) The procedure to manually reset the oil light on your 2015 Kia Forte is very simple and takes only a few seconds to complete. First, go inside the ca…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos