Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light of the Kia Picanto?

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure warning light on the Kia Picanto, you need to inflate the tires to the corresponding pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the tires have been inflated, you can go inside the cabin and connect a diagnostic tool to the vehicle's OBD port: following the instructions in the tutorial, you will be able to permanently turn off the warning light on the instrument panel.

Finally, you can disconnect the scanner and turn off the instrument panel.


Posted on 11 March 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Kia Picanto
How to Reset the Tyre Pressure Light on a Kia Picanto
Kia Picanto (2018-2026 / MK 3, JA) In today's video, we will see how to reset the tyre pressure light on a Kia Picanto. First, check the pressure of all four tyres and, if necessary, r…
How to reset the tyre pressure warning light on the Kia Picanto 3
How to reset the tyre pressure warning light on the Kia Picanto 3
Kia Picanto (2018-2026 / MK 3, JA) In this brief guide, follow the main instructions to reset the tyre pressure monitoring system (TPMS) warning light on the second and third generatio…
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
Kia Picanto (2018-2026 / MK 3, JA) Here are the steps to reset the tyre pressure warning light on the Kia Picanto; before resetting the TPMS sensors, ensure all four tyres are at the c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos