Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car stereo in the KIA Picanto?

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

In this tutorial we can see how to replace the car radio in the KIA Picanto, an extremely simple and fast operation. First of all, make sure that the key is not inserted, in order to operate safely, then, using plastic spatulas so as not to leave marks, unclip the radio frame by levering along the entire perimeter.

Next, unscrew the four fixing screws indicated with a simple cross-tip screwdriver, grip the radio and extract it from the housing. At this point, all that remains is to disconnect the internal connectors, install the replacement and reassemble everything.


Posted on 23 May 2025 by ScegliAuto


Related tutorials

Removing the Radio from Kia Picanto
Removing the Radio from Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today, in this tutorial video, we will see how to remove the radio from a Kia Picanto. First, get inside the car and gather some plastic levers: then…
Where are the Fuses Located on the Kia Picanto?
Where are the Fuses Located on the Kia Picanto?
Kia Picanto (2004-2011 / MK 1, 2A) The fuses on the Kia Picanto are divided within the designated fuse boxes located inside the vehicle. In this model, there are two boxes: the first i…
How do you reset the tire pressure light on the Kia Picanto?
How do you reset the tire pressure light on the Kia Picanto?
Kia Picanto (2018-2026 / MK 3, JA) The tire pressure sensor of the Kia Picanto can be reset by inflating the tires until they reach the corresponding pressure value: this value will be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos