Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : Replacement original Kia Picanto car radio

Kia Picanto - Video tutorial

Model: Kia Picanto JA, MK 3 - Years 2018-2024
Part: Car stereo
Operation: Replacement original Kia Picanto car radio

Today we will see how to remove and replace the original car radio of a third series Kia Picanto. First we get on board the car and we go to remove the plastic that we find above the instrument panel, unhooking it from the rear supports; then we remove all the plastics located on the dashboard, using a very thin plastic lever. Once all the supports have been removed, we also extract the air vents and unscrew the fixing screws of the car radio; we just have to pull and remove the original car radio, disconnecting the various cables and connectors on the back.


Posted on 25 March 2024 by ScegliAuto



Disassembly of the original Kia Picanto radio
Kia Picanto (2018-2024 / JA, MK 3) Let's see how to disassemble the original car stereo of a 2018 Kia Picanto, following these simple instructions. We get on board the car and start by
Car radio replacement on Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Let's see the car stereo replacement on a Kia Picanto. To replace the car radio we have to remove the plastic cover placed around the car radio. Remo
Kia Picanto radio disassembly
Kia Picanto (2011-2018 / TA, MK 2) Today, in this video tutorial, we will see how to disassemble the car radio in a Kia Picanto. First, let's get inside the car and equip ourselves wit

    Frequently Asked Questions

    • Picanto 2011-2018 - Why does the radio no longer work on the Kia Picanto? Read Answer
    • Picanto 2018-2025 - What warning lights are there in the instrument cluster of my Kia Picanto? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos