Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Original Radio from a Kia Picanto

Model: Kia Picanto MK 3, JA - Years 2018-2026
Part: Car stereo

Follow these simple instructions to remove the original radio from a 2018 Kia Picanto. Get inside the vehicle and start by removing the plastic panel above the instrument cluster; simply unclip it from the rear supports to take it off, as shown in the video. Next, detach the plastic trim that runs across the dashboard using a thin lever, and also remove the air vents in the same manner; then, unscrew the mounting screws of the radio to remove it, disconnecting the various cables at the back.

Updated on 3 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Kia Picanto (2018-2026 / MK 3, JA) Today, learn how to remove and replace the original radio in a third-generation Kia Picanto. First, get inside the car and remove the plastic above t…
Kia Picanto (2011-2018 / TA, MK 2) Replace the radio on a Kia Picanto. To replace the car radio, remove the plastic cover surrounding the radio. Use a plastic trim tool to detach the r…
Kia Picanto (2004-2011 / 2A, MK 1) In the following video, we will see how to remove the radio from a Kia Picanto. First, get into the car and start by removing all the plastics found …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos