Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the windshield wiper and cabin filter of the Kia EV6 DIY

Model: Kia Ev6 MK 1 - Years 2021-2026
Part: Windshield wipers

To replace the windshield wiper on the Kia EV6, it is best to start with a clean windshield and the car parked. The wiper arm is lifted to a vertical position, allowing you to work without touching the glass. At the connection point between the arm and the blade, there is a release tab: it should be pressed while sliding the old blade forward, which will come out of its slot. At this point, take the new blade, insert it into the same guide, and push until you hear the locking click, ensuring it is securely attached before carefully lowering the arm back onto the windshield.

As for the cabin filter, the EV6 houses it in the front compartment under the hood. After opening the hood, lift the cover of the small front storage compartment and detach the plastic panels that cover the area in front of the electronic group. Once the cover is removed, the rectangular filter door is visible: by pulling it towards you, you can extract the old filter element, which should be removed carefully to avoid spreading dust. Then take the new filter, check the direction of airflow indicated on the frame, and insert it into the slot all the way. Finally, close the door, reattach the plastic panels, and put the compartment cover back on. In this way, with just a few steps, both the windshield wipers and the cabin filter of the Kia EV6 are renewed, improving visibility and indoor air quality.

Posted on 1 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Kia Ev6 (2021-2026 / MK 1) Below, we will discover the steps on how to disassemble and replace the cabin air filter of the Kia EV6. First, let's open the front hood of the vehi…
Kia Ev6 (2021-2026 / MK 1) If you want to manually complete the reset of the TPMS light related to the tire pressures of your Kia EV6, then all you have to do is follow the ste…
Kia Ev6 (2021-2026 / MK 1) For replacing the small button battery located in the key of your Kia EV6, you just need to follow these simple steps. First of all, make sure you ha…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos