Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the wipers on the Kia Sorento DIY

Model: Kia Sorento MK 4 - Years 2020-2026
Part: Windshield wipers

Secure the Kia Sorento with the bonnet closed. Turn the ignition OFF (instrumentation off). Within a few seconds, operate the single wipe function of the wiper once (holding the lever down for a moment). The arms will move to the service position at the top of the windscreen, allowing you to lift them and replace the blades without hitting the edge of the bonnet. Once maintenance is complete, turn the ignition ON and operate the wiper again: the arms will return to the resting position. If the sequence is not recognised, repeat it, adhering to the order and timing.

Posted on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wipers on the KIA Sorento?
How to Replace the Wipers on the KIA Sorento?
Kia Sorento (2002-2009 / MK 1) In this tutorial, you will see how to replace the wipers on the KIA Sorento, an extremely simple and quick operation. First, ensure that the wipers a…
How to Replace the Windscreen Washer Pump on a Kia Sorento
How to Replace the Windscreen Washer Pump on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows how to replace the washer pump on a Kia Sorento. First, ensure the windscreen wipers are functioning and that there is water in the …
How to Remove the Windscreen Wiper Motor on a Kia Sorento
How to Remove the Windscreen Wiper Motor on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) The following description and video tutorial provide instructions for removing the front wiper motor. After opening the bonnet, obtain a spanner to r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos