Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on the KIA Sorento?

Model: Kia Sorento MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Windshield wipers

See other generations:
Video tutorial

In this tutorial, you will see how to replace the wipers on the KIA Sorento, an extremely simple and quick operation. First, ensure that the wipers are in the resting position, then lift the first wiper, unclip the plastic cover of the joint, push the blade downwards, and separate it from the arm. Next, position the replacement, press it firmly, and clip the pin into the appropriate hook.

Finally, lower the wiper and repeat the operation on the opposite side if necessary. The same procedure can be applied to the rear wiper.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Replacing the Wiper Blades on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) Learn how to replace the front wiper blades on a Kia Sorento. Take the front wiper blade (to be replaced) in hand, gently pull the movable blade (wit…
How to reset the wipers on the Kia Sorento DIY
How to reset the wipers on the Kia Sorento DIY
Kia Sorento (2020-2026 / MK 4) Secure the Kia Sorento with the bonnet closed. Turn the ignition OFF (instrumentation off). Within a few seconds, operate the single wipe function of…
How to Replace the Windscreen Washer Pump on a Kia Sorento
How to Replace the Windscreen Washer Pump on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows how to replace the washer pump on a Kia Sorento. First, ensure the windscreen wipers are functioning and that there is water in the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos