Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the 2022 Kia Niro located?

Model: Kia Niro MK 1 - Years 2016-2023
Part: Checks and maintenance

If you own a first-generation Kia Niro (year 2022) and want to find out where the OBD port is located, you just need to carefully read the following guide and follow the described steps. Once you are inside the cabin, go to the driver's seat and make sure your Kia Niro is completely off. At this point, locate the small compartment on the lower side of the dashboard and open it with your hand. Next, remove the plastic cover and then locate the OBD port you were looking for to complete the procedure.

Posted on 13 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Kia Niro?
How to reset the "Service" light on a Kia Niro?
Kia Niro (2021-2026 / SG2) To reset the "Service" light on a Kia Niro, turn on the instrument panel without starting the engine. Use the controls on the steering wheel to navig…
How to Replace the Key Battery on a Kia Niro
How to Replace the Key Battery on a Kia Niro
Kia Niro (2016-2023 / MK 1) To correctly replace the small battery inside your first-generation Kia Niro key, you only need a flathead screwdriver and a new battery, which is a …
How to Reset the Tyre Pressure Warning Light on a Kia Niro
How to Reset the Tyre Pressure Warning Light on a Kia Niro
Kia Niro (2016-2023 / MK 1) Today’s process will show you how to reset the tyre pressure warning light on a Kia Niro in simple steps; before performing the reset, ensure all fou…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos