Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on the Kia Sorento

Model: Kia Sorento MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the TPMS light on the Kia Sorento. First, check and adjust the tyre pressures, comparing them with those indicated on the sticker located on the driver’s door pillar.

On some versions, simply drive for 15/20 minutes at a speed above 15 mph: this allows the system to detect the new pressures and reset automatically. On older versions, you will find a physical reset button, which may be located under the steering wheel, in the glove compartment, or on the driver’s control panel.

Just turn on the ignition, press and hold the button, and wait for the light to blink three times. Release the button, turn off the car, and then turn it back on. On newer models, this operation can be done via the infotainment system by going to 'settings'/'vehicle'/'tyre pressure monitoring'. Here, look for the 'reset' option and confirm the operation.


Posted on 1 May 2026 by ScegliAuto


Related tutorials

How to Check and Reset the Tyre Pressure Warning on the Kia Sorento
Kia Sorento (2014-2020 / MK 3) In this guide, you will check the tyre pressures and subsequently reset the TPMS sensors on the Kia Sorento; before resetting, it is necessary for al…
Resetting the Tyre Pressure Warning Light on the Kia Sorento
Resetting the Tyre Pressure Warning Light on the Kia Sorento
Kia Sorento (2020-2026 / MK 4) Let's briefly review the instructions for resetting the tyre pressure warning light (TPMS) on the Kia Sorento; before performing the reset, ensure th…
How to Reset the TPMS Light on a 2021 Kia Sorento
How to Reset the TPMS Light on a 2021 Kia Sorento
Kia Sorento (2020-2026 / MK 4) The TPMS light illuminates on a vehicle when the tyre pressure does not meet the manufacturer's specifications. After inflating the tyres to the manu…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos